High voltage probe calibrator

TK series, KHT series (made by PMK)

Is your high voltage probe properly adjusted for your oscilloscope? High voltage generator for high voltage probe calibration. The commonly used high-impedance high-voltage probe has adjustment points for optimal waveform observation on the oscilloscope used. For example, a 1000:1 probe would provide a 1kV pulse output and a 1MΩ terminated oscilloscope would provide a 1V signal. By the way, when a 1V signal is applied, only 1mV is output. This will not calibrate the probe. Use a high voltage probe that has been properly calibrated by giving it the correct signal. A high-voltage calibrator is essential for this. Perform high voltage probe adjustments to accurately capture peak pulses.
TK100C	KHT1000D	KHT6000C

specification

Item	TK100C	KHT1000D	KHT6000C
Output voltage	100V	±100/200/500/1000V switch change (Continuous: 100-1000V*)	500 to 6000V
DC accuracy	±0.5%	±1 / 0.5 / 0.25%	±0.1%
Rise time	<6ns	<14ns	<45ns
Overshoot	<3%	<2%	<2%
Repetition frequency	100Hz	50Hz (Continuous: 1-100Hz*)	1 Hz
Square wave pulse width	-	5 ms (Continuous: 1-100ms*)	1 ms
Trigger output	None	10V	5V
Trigger pulse width	5 ms	Reference value 1 μs	10 μs
External dimensions W×H×L	135 x 30 x 70 mm	250 x 140 x 300 mm	250 x 140 x 395 mm
Power supply	AC adapter (standard accessory)	AC90-250V / 50-60Hz	AC90 ~ 250V 50 ~ 60Hz

*When controlling USB interface

Order information

appearance	Product name	Model number / (Order number)
	High voltage probe calibrator	TK100C (896-235-000)
	High voltage probe calibrator	KHT1000D (894-235-000)
	High voltage probe calibrator	KHT6000C (894-600-000)

Current probe calibrator

KSZ series (made by PMK)

There are various types of current probes such as Hall element and Rogowski coil type, but it is a calibrator that supports accurate measurement of current amplitude and rise time of clamp type current probe. This current probe calibrator is a device required for regular calibration to check the performance when the current probe and measuring instrument are connected.
KSZ10C	KSZ100C

specification

Item	KSZ10C	KSZ100C
Square wave current output	0.05 / 0.1 / 0.2 / 0.5 / 1/2 / 5/10 A	20/50/100 A
Rise time (20%-80%)	10-34 ns	40-120ns
Overshoot	<2%	<2%
Repetition frequency	1 Hz	0.5Hz
Square wave pulse width	1 ms	1ms(20A,50A), 0.5ms(100A)
External dimensions W×H×L	240 x 140 x 370 mm	135 x 300 x 240 mm

Order information

appearance	Product name	Model number
	Current probe calibrator	KSZ10C
	High current probe calibrator	KSZ100C